Ip Acl Configuration Example - D-Link DWC-1000 User Manual

Wireless controller

Hide thumbs Also See for DWC-1000:

Table of Contents

Section 4 - Advanced WLAN Configuration

Example: To block ICMP traffic between the two wireless clients, say STA1 (Station 1) and STA2 (Station 2).

The topology for the above configuration is given below:

Follow the steps given below:

1. Go to Wireless > ACL > IP ACL page, and click Add New IP ACL.

2. Select IP ACL as Create New Extended IP ACL from the drop-down menu.

3. Enter IP ACL ID.

D-Link DWC-1000 User Manual

TOS Mask: This value is a hexadecimal number from 00 to FF. Specifies the bit

positions that are used for comparison against the IP TOS field in a packet.

IP ACL Configuration Example