Access Server Client - D-Link DWC-1000 User Manual

Section 7 - VPN
To configure the switch as an OpenVPN access server client:
1. Click VPN > OpenVPN > OpenVPN Settings.
2. Toggle OpenVPN to ON and complete the fields in the table below.
Field
Mode
Port
Enable Private Tun-
nel
Upload Status
File
Certificates
Enable Tls Authenti-
cation Key
Block Invalid Client
Certificates
Save
D-Link DWC-1000 User Manual

Access Server Client

Select Access Server Client.
Enter what port to use. The default port is 1194.
Enable Private Tunnel. Applicable only in OpenVPN Access Server mode. This feature connects
to www.privatetunnel.com which provides a secured access connectivity. Reachability to www.
privatetunnel.com is required.
Displays if a configuration file has been uploaded.
Click Browse and locate the configuration file. Click Open and then click Upload.
Select the set of certificates OpenVPN server uses. First row indicates the set of certificates and
keys that the server uses. Second row indicates the set of certificates and keys newly uploaded.
Enabling this adds Tls authentication which adds an additional layer of authentication. This can
be checked only when the tls key is uploaded. By default, it is disabled.
Enabling this adds facility to block invalid client certificate. This feature requires crl certificate
which contains list of client certificates to be blocked. Please upload crl certificate in OpenVPN
Authentication page.
Click Save to save and activate your settings.
Description
280