Email Configuration - D-Link DWC-1000 User Manual

Section 6 - Securing Your Network
Path: Security > Authentication > Email Configuration
Using this feature of email configuration, the user is allowed to configure the SMTP server to email the captive
portal user credentials from the controller.
To configure:
1. Go to Security > Authentication > Email Configuration.
2. Fill-in the fields shown in the table below.
Field
E-mail Server Address
SMTP Port
Return E-mail address
Authentication with SMTP
Respond to Identd from SMTP
Save
D-Link DWC-1000 User Manual

Email Configuration

Enter the IP address or Internet Name of an SMTP server. The controller will connect
to this server to send captive portal user credentials.
Enter the SMTP port of the e-mail server.
Type the e-mail address where the replies from the SMTP server are to be sent
(required for failure messages).
If the SMTP server requires authentication before accepting connections, select
either Login Plain or CRAM-MD5 and enter the User Name and Password to be used
for authentication. To disable authentication, select None.
Toggle it ON to configure the controller to respond to an IDENT request from the
SMTP server.
Saves the settings.
Description
230