Dhcp Range - D-Link DWC-1000 User Manual

Wireless controller

Hide thumbs Also See for DWC-1000:

Table of Contents

Section 7 - VPN

This page displays the IP range to be assigned to clients connecting using DHCP over IPSec. By default, the range

is in 192.168.12.0 subnet.

To configure the DHCP over IPSec DHCP server settings:

1. Click VPN > IPSec VPN > DHCP Range.

2. Complete the fields in the table below and click Save.

Starting IP Address

Ending IP Address

Note: To support DHCP over IPsec, enable DHCP server on the LAN.

D-Link DWC-1000 User Manual

DHCP Range

Enter the starting IP address to issue your clients connecting using DHCP over IPSec.

Enter the ending IP address.

Enter the subnet mask.

Click Save to save and activate your settings.