D-Link DWC-1000 User Manual page 172

Section 5 - Advanced Network Configuration
2. Click Add New VLAN. The following page will appear.
3. Complete the fields in the table below, and click Save. The fields vary with the type of the captive
portal.
Field
VLAN ID
Name
VLAN Type
Activate InterVLAN Routing
Captive Portal Type
Authentication Server
Authentication Type
Login Profile Name
IP Address
Subnet Mask
DHCP Mode
LAN Proxy
D-Link DWC-1000 User Manual
Enter a unique ID to this VLAN (2 - 4093).
Enter a unique name for this VLAN. The name should allow you to easily identify this
VLAN from others you may add.
Allows you to select the type of VLAN that you would like to create. If VLAN (L3) is
selected, VLAN will be associated with the L3 network. If VLAN (without IP interface)
is selected, a VLAN is created in switch but none of the L3 network associated with it.
Allows or denies communication between VLAN networks. Choices are:
• Enable = allows communications between different VLANs.
• Disable= denies communications between different VLANs.
Select the type of captive portal from free, SLA, Permanent User, Temporary User, or
Billing User.
Select the type of authentication server to authenticate captive portal for permanent,
temporary, or billing users. It shows the available authentication servers among which
one can be selected for this VLAN. All users login into the captive portal for this VLAN
, are authenticated through the selected server. This option appears only if Captive
Portal Type is selected as Permanent user. List of available authentication servers are:
1. Local User Database
2. Radius Server
3. LDAP Server
4. POP3
This field is available only if Radius Server is selected as an Authentication Server.
Available authentication types are PAP/CHAP/MSCHAP/MSCHAPV2.
Select a captive portal from the drop-down menu. Click Create a Profile to create a
new profile.
Enter an IP address for the Multi-VLAN subnet.
Enter the subnet mask for the Multi-VLAN subnet.
Select whether to enable DHCP Server or DHCP Relay.
Click to enable DNS proxy.
Description
172