Configure Nt Domain Server - D-Link DWC-1000 User Manual

Section 6 - Securing Your Network
Path: Security > Authentication > External Auth Server > NT Domain
The NT Domain server allows users and hosts to authenticate themselves via a pre-configured Workgroup
field. Typically Windows or Samba servers are used to manage the domain of authentication for the centralized
directory of authorized users.
To configure your NT Domain Server:
1. Go to Security > Authentication > External Auth Server > NT Domain page.
2. Complete the NT Domain server information from the table below and click Save.
Field
Authentication Server
Workgroup
Timeout
Retries
D-Link DWC-1000 User Manual

Configure NT Domain Server

Enter the IP address of the NT Domain server.
Enter the Workgroup for the Authentication Server.
Set the amount of time in seconds that the controller should wait for a response from
the NT Domain server.
This determines the number of tries the controller will make to the NT Domain server
before giving up.
Description
227