Initializing Lpar Manager Configuration - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

Initializing LPAR manager configuration

Perform the following procedure for initializing LPAR manager configuration.
Here, "LPAR manager configuration" is called "LPAR manager setting". When
a server blade is turned off, an LPAR manager setting can be initialized.
When an LPAR manager setting is initialized, LPAR manager configuration
information is lost. So, it is recommended that LPAR manager configuration
information is backed up before initializing an LPAR manager setting.
1 Click Resources.
.
2 Click Modules > Right pointing triangle to All Modules then Server
.
Blades > target server blade.
2-190
Hitachi Compute Blade 500 Series Management Module Setup Guide
Functional detail