Authentication Encryption Setting - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

Displaying/setting HTTP connecting
configuration
Displaying/setting HTTPS connecting
configuration
Displaying TELNET connecting configuration
Setting TELNET connecting configuration
Displaying FTP connecting configuration
Setting FTP connecting configuration
Displaying SSH connecting configuration
Setting SSH connecting configuration
Displaying HTTP connecting configuration
Setting HTTP connecting configuration
Displaying HTTPS connecting configuration
Setting HTTPS connecting configuration
Displaying/setting LFT function

Authentication encryption setting

Management modules can encrypt authentication information including user
IDs, passwords, and private keys. The factory default value of this setting is
Disabled. If the authentication encryption setting is enabled, authentication
information on the management module is encrypted.
Encryption of authentication information prevents the information from being
leaked in the case that the management module is taken out of the system
unit and the media device is read.
Displaying the authentication encryption
setting
Setting the authentication encryption setting
Hitachi Compute Blade 500 Series Management Module Setup Guide
Item
Administration tab > Service > HTTP tab
Administration tab > Service > HTTPS tab
Table 2-40 CLI console command
Item
Table 2-41 LCD touch console operation
Item
Table 2-42 CLI console operation
Item
Functional detail
Operation
Command
show remote-access protocol telnet
set remote-access protocol telnet
show remote-access protocol ftp
set remote-access protocol ftp
show remote-access protocol ssh
set remote-access protocol ssh
show remote-access protocol http
set remote-access protocol http
show remote-access protocol https
set remote-access protocol https
Operations
System settings > Service
Command
show user authentication encryption
set user authentication encryption
2-39