Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 52

Supported
Feature
protocol
HA monitor Hitachi
linkage protocol
RADIUS RADIUS
authentication
Syslog transfer SYSLOG
Legend:
Y: Configurable Blank: Not configurable
Notes:
1 Connections from all IP addresses are not allowed, while the port is open.
.
2 Connection using SSH version 1 is not supported.
.
3 This protocol can be disabled by disabling the feature. No communication is performed to the port.
.
4 This protocol can be disabled by disabling the feature. The port is open.
.
5 You can select ciphertext or cleartext by setting.
.
6 This protocol can be disabled by disabling the feature or HTTPS itself. The port is open.
.
7 Registering no management server can disable the protocol. The port itself is isolated.
.
8 Registering no management server can disable the protocol. No communication is performed to the
.
port.
9 Destination port for communication with the management module.
.
10 The connection with the Web console might be disabled.
.
11 Specify together with the SSH service settings.
.
12 Must be set for both the IPv4 network and the IPv6 network.
.
13 If IPv6 addresses are used for HTTPS access, a certificate error (warning) is displayed.
.
14 The port number is not set by default. When using the HA monitor, the user sets the port number.
.
15 This protocol can be disabled by disabling the feature. The port itself is isolated.
.
16 The user password is encrypted, and notification is sent to RADIUS servers.
.
Tip: [Management module firmware version A0205 or later]
When LPAR manager supports encrypted communication, control
communication between the management module and LPAR manager is
encrypted.
Feature
Server blade
Web console
IPMI over LAN
2-28
Hitachi Compute Blade 500 Series Management Module Setup Guide
Cipher-
Default
text or
port No.
cleartext
clear
14
Notes
1812
16
clear
cipher/
9
514
5
clear
Table 2-34 Features and protocol provided by BMC
Default
Supported
port
protocol
No.
1 443
HTTPS
IPMI v1.5 623
IPMI v2.0 623
Functional detail
Restriction
Service
on IP
disabled
address
-
15
Y
-
3
Y
-
3
Y
Cipher-
Service
text or
disabled
cleartext
cipher Y
clear Y
cipher Y
Changing
port Remarks
number
Y
Y
Y
Restriction Changing
on IP port
address number
Y -
Y -
Y -