Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 302

ID
392E
392F
3930
3931
3932
393A
393B
393C
393D
8800 Maintenance
8801
8802
8803
8804
8805
2-278
Hitachi Compute Blade 500 Series Management Module Setup Guide
Operation
Recording trigger
category
Change to the USB
(Front panel) settings
Change to the
authentication
encryption setting
Change to the Server
blade settings
Change to the RADIUS
settings
Change to the RADIUS
server settings
Change to the
Management module -
LP communication
setting
Changing server blade
settings.
Changing server blade
settings.
Changing server blade
settings.
Shifting normal mode to
maintenance mode for
server chassis.
Shifting maintenance
mode to normal mode
for server chassis.
Shifting normal mode to
maintenance mode for
server blade.
Shifting maintenance
mode to normal mode
for server blade.
Shifting normal mode to
maintenance mode for
switch module.
Shifting maintenance
mode to normal mode
for switch module.
Functional detail
Message
USB setting is changed.
Channel:xxx Category:xxx
Detail:xxx Value:xxx
Authenticated encryption setting is
changed. Channel:xxx Value:xxx
On Server blade N, setting is
changed. Channel:xxx Category:xxx
Assign:xxx Redundancy:xxx
Setting of RADIUS was changed.
Channel:xxx Category:xxx
Detail:xxx Value:xxx
Setting of RADIUS serverN was
changed. Channel:xxx Category:xxx
Detail:xxx Value:xxx
Management module - LP
communication setting was
changed. Channel:xxx Category:xxx
Detail:xxx Value:xxx
On Server blade N, setting is
changed. Channel:xxx Category:xxx
Detail:xxx Value:xxx
On Server blade N, setting is
changed. Channel:xxx Category:xxx
Detail:xxx Value:xxx
On Server blade N, setting is
changed. Channel:xxx Category:xxx
Detail:xxx Value:xxx
On Server chassis, changed into
maintenance mode from normal
mode. Channel:xxx
On Server chassis, changed into
normal mode from maintenance
mode. Channel:xxx
On Server blade N, changed into
maintenance mode from normal
mode. Channel:xxx
On Server blade N, changed into
normal mode from maintenance
mode. Channel:xxx
On Switch module N, changed into
maintenance mode from normal
mode. Channel:xxx
On Switch module N, changed into
normal mode from maintenance
mode. Channel:xxx