Advertisement
Weighing function
Fig. 3
Step onto the scales and stand still until the
D
bar graph on the display stops moving.
Distribute your weight evenly on both legs.
The measurement can now be read off in kg/g.
The scales automatically switch off for a couple
of seconds after the measuring process. Before
the scales switch off, the bar graph is displayed
briefly.
Inputting personal data
Do not use these scales during pregnancy.
Persons with medical implants such as a
pacemaker should use the weighing function
only .
To measure the body fat and body water
content, muscle and bone mass, you must first
input your personal details.
The scales have 10 memory locations where
personal details such as height, activity level
(AL), age, sex and mode (Normal/Athlete) are
input.
Note: If no button is pressed for approx.
15 sec. during programming, the scales switch
off automatically. If the + / - button is held
down, the numerical sequence is accelerated.
Activity level (AL)
Each step corresponds to an individual life style
and affects the analysis values.
Activity level
Continuously sitting/lying
Setting 1
(AL1)
Sitting job, no sporting activities
Setting 2
(AL2)
Sitting job, minor sporting
Setting 3
activities
(AL3)
Standing job (housework, selling)
Setting 4
(AL4)
Physically demanding job,
Setting 5
competitive sport
(AL5)
Fig. 4
To program the scales, place them on a level
D
surface.
Press the MODE button. The setting for
D
height input flashes.
Set body height with the + / - buttons.
D
Confirm by pressing the SET button.
D
The setting for the activity level (AL) flashes.
Set the appropriate activity level with the + /
D
- buttons.
Confirm by pressing SET button. The setting
D
for input age flashes:
Set age with the + / - buttons
D
Confirm by pressing the SET button.
D
The symbol for
flashes.
Select the appropriate sex with + / -
D
buttons.
Confirm by pressing the SET button.
D
The symbol for Normal or Athlete mode
flashes.
Select mode N (Normal) or A
D
(sportsperson/athlete) with the + / - buttons.
Note: This input is displayed for persons of age
18 and above only. For persons under the age
of 18 this input option is skipped.
Confirm by pressing the SET button.
D
An acoustic signal sounds. All settings are
now displayed (Rsymbol).
Select a memory location between 1 and
D
10 with + / - buttons. Memory locations
already in use are identified with the
symbol.
Confirm by pressing the SET button.
D
An acoustic signal sounds. The inputs are
saved.
The scales automatically switch off after a
couple of seconds. To assign other memory
locations, repeat the Inputting personal data
process.
Note: Select a memory location which is to be
deleted. Then simultaneously press the + and -
buttons. The inputs in this memory location are
deleted.
(female) or
(male) now
J
en
9
Advertisement
