Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
vlan port ingressfilter all
This command enables ingress filtering for all ports. If ingress filtering is disabled, frames received with VLAN IDs that do
not match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that
VLAN.
Default
disabled
Format
vlan port ingressfilter all
Mode
Global Config
no vlan port ingressfilter all
This command disables ingress filtering for all ports. If ingress filtering is disabled, frames received with VLAN IDs that do
not match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that
VLAN.
Format
no vlan port ingressfilter all
Mode
Global Config
vlan port pvid all
This command changes the VLAN ID for all interface.
Default
1
Format
vlan port pvid all <1-3965>
Mode
Global Config
no vlan port pvid all
This command sets the VLAN ID for all interfaces to 1.
Format
no vlan port pvid all
Mode
Global Config
vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to enabled. If tagging is enabled, traffic is
transmitted as tagged frames. If tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN
identification number.
Format
vlan port tagging all <1-3965>
Mode
Global Config
© 2009 D-Link Corporation. All Rights Reserved
36
Advertisement
Table of Contents
