C
P
APTIVE
ORTAL
The commands in this section are related to captive portal configurations.
configuration (Captive Portal)
Use this command to enter the Captive Portal Instance Mode.
The captive portal configuration, identified by CP ID 1, is the default CP configuration. You can create up to nine additional
captive portal configurations. The system supports a total of ten CP configurations. The Captive Portal ID <cp-id> variable
is a number in the range of 1-10.
Format
configuration <cp-id>
Mode
Captive Portal Config
no configuration
This command deletes a captive portal configuration. The command fails if interfaces are associated to this configuration.
The default captive portal configuration cannot be deleted. The Captive Portal ID <cp-id> variable is a number in the range
of 1-10.
Format
no configuration <cp-id>
Mode
Captive Portal Config
enable (Captive Portal)
This command enables a captive portal configuration.
Default
Enable
Format
enable
Mode
Captive Portal Instance
no enable
This command disables a captive portal configuration.
Format
no enable
Mode
Captive Portal Instance
name
This command configures the name for a captive portal configuration. The name can contain up to 32 alphanumeric
characters.
Format
name <cp-name>
Mode
Captive Portal Instance
C
ONFIGURATION
Captive Portal Configuration Commands
C
OMMANDS
351