System Information And Statistics Commands - D-Link DWS-4000 Series Cli Command Reference

D-Link Unified Switch CLI Command Reference
boot system
This command activates the specified image. It will be the active-image for subsequent reboots and will be loaded by the
boot loader. The current active-image is marked as the backup-image for subsequent reboots.
Format
boot system <image-file-name>
Mode Privileged EXEC
show bootvar
This command displays the version information and the activation status for the current active and backup images
Format
show bootvar
Mode Privileged EXEC
filedescr
This command associates a given text description with an image. Any existing description will be replaced.
Format
filedescr {image1 | image2} <text-description>
Mode Privileged EXEC
update bootcode
This command updates the bootcode (boot loader) on the switch. The bootcode is read from the active-image for subsequent
reboots.
Format
update bootcode
Mode Privileged EXEC
S I
YSTEM NFORMATION AND
This section describes the commands you use to view information about system features, components, and configurations.
show arp switch
This command displays the contents of the IP stack's Address Resolution Protocol (ARP) table. The IP stack only learns
ARP entries associated with the management interfaces (the network ports). ARP entries associated with routing interfaces
are not listed.
Format
show arp switch
Mode Privileged EXEC
Term Definition
IP Address IP address of the management interface or another device on the management network.
MAC Address Hardware MAC address of that device.
© 2009 D-Link Corporation. All Rights Reserved
410
S C
TATISTICS OMMANDS