D-Link DWS-4000 Series Cli Command Reference page 323

Diffserv Policy Up............................. <none>
show wireless client client-qos radius status
This command displays detailed client QoS data for clients associated to a managed AP. These are the configured values
successfully obtained from a RADIUS server for the specified client.
Format
show wireless client <macaddr> client-qos radius status
Mode Privileged EXEC
Field Description
macaddr Client MAC address.
MAC Address The Ethernet address of the client station.
SSID The network on which the client is connected.
Bandwidth Limit Defines the maximum transmission rate limit in bits per second for traffic flowing from the AP to the
Down client. A value of 0 disables rate limiting in this direction. A value of <none> indicates that this
parameter was not obtained from RADIUS for the client.
Bandwidth Limit Defines the maximum transmission rate limit in bits per second for traffic flowing from the client to the
Up AP. A value of 0 disables rate limiting in this direction. A value of <none> indicates that this parameter
was not obtained from RADIUS for the client.
Access Control Defines the configured access control list to use for traffic flowing from the AP to the client. Both the
Down ACL type and its name (or number) is displayed. A value of <none> indicates that this parameter was
not obtained from RADIUS for the client.
Access Control Up Defines the access control list to use for traffic flowing from the client to the AP. Both the ACL type and
its name (or number) is displayed. A value of <none> indicates that this parameter was not obtained
from RADIUS for the client.
Diffserv Policy Defines the Diffserv policy to use for traffic flowing from the AP to the client. A value of <none>
Down indicates that this parameter was not obtained from RADIUS for the client.
Diffserv Policy Up Defines the Diffserv policy to use for traffic flowing from the client to the AP. A value of <none>
indicates that this parameter was not obtained from RADIUS for the client..
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless client 00:0F:B5:86:93:95 client-qos radius status
MAC Address.................................... 00:0F:B5:86:93:95
SSID........................................... l7network
Bandwidth Limit Down........................... <none>
Bandwidth Limit Up............................. <none>
Access Control Down............................ <none>
Access Control Up.............................. <none>
Diffserv Policy Down........................... <none>
Diffserv Policy Up............................. <none>
(DWS-4026) #
show wireless client statistics
This command displays association or session statistics for clients currently associated with a WS managed AP. The session
statistics show the cumulative association values if a client roams across managed APs. If no optional parameters are
specified, the session statistics are displayed.
Client Association Status and Statistics Commands
315