Building Networks for Peopl e Quick Installation Guide 802.11n Unified Access Point This document will guide you through the basic installation process for your new D-Link Unified Wireless Access Point. DWL-3600AP Quick Installation Guide...
This installation guide provides basic instructions for installing the DWL-3600AP Wireless Access Point on your network. For additional information about how to use the Access Point, please refer to the User Manual, which is available on the D-Link support website.
POWER – When the LED is lit, the access point is powered and ready for use. Connections 2.5A RESET LAN Port (PoE) Power Receptor Console Port Reset Port Figure 2. DWL-3600AP Rear Panel D-Link DWL-3600AP Quick Install Guide 3...
To power on the DWL-3600AP, you can use ONE of the following methods: 1. Connect the supplied power adapter 2. Plug one end of an Ethernet cable into the LAN port of the DWL-3600AP and the other end into a port on a power over Ethernet (PoE) switch.
Wall Installation Recommendations If you plan to install the DWL-3600AP on a wall or other vertical surfaces, orient the top of the access point (the side with the LEDs) toward the intended coverage area.
Page 6
4. Use the supplied screws to attach the mounting ring to the wall. Figure 3. Insert screws through mounting ring 5. Plug the CAT5 cable into the LAN port on the access point. Figure 4. Plug cable into access point 6 D-Link DWL-3600AP Quick Install Guide...
Page 7
Figure 5. Insert access point into mounting ring 7. Twist counter-clockwise to lock the access point onto the ring. The lock symbol on the access point must point directly to the Close text on the mounting ring. D-Link DWL-3600AP Quick Install Guide 7...