Wireless Network Commands - D-Link DWS-4000 Series Cli Command Reference

D-Link Unified Switch CLI Command Reference
W N
IRELESS ETWORK
The commands in this section provide configuration of wireless networks.
network (Wireless Config Mode)
This command adds a network configuration (if not already present) and enters the network configuration mode. In this
mode, you can modify the network configuration parameters.
Default Networks 1-16 are created by default.
Format
network <1-64>
Mode Wireless Config
Parameter Description
1-64 Integer ID for the network.
no network
The no version of this command deletes a configured network. If a network is applied to one or more VAPs within an AP
profile, it cannot be deleted. The first sixteen default networks can never be deleted.
Format
no network
Mode Wireless Config
ssid
This command configures the SSID for the wireless network. A network must be configured with an SSID of one or more
characters. The SSID can be modified, but cannot be deleted. Except for the default Guest Network, the default SSID for
each network is 'Managed SSID' followed by the unique Network ID.
Default Network 1 - Guest Network
Network <networkid> – Managed SSID <networkid>
Format
ssid <name>
Mode Network Config
Parameter Description
name Service Set Identifier, must be between 1-32 alphanumeric characters. To use spaces in the SSID, use
quotes around the name.
vlan (Network Config Mode)
This command configures the default VLAN ID for the network. If there is no RADIUS server configured or a client is not
associated with a VLAN via RADIUS, this is the VLAN assigned.
© 2009 D-Link Corporation. All Rights Reserved
244
C
OMMANDS