Suzuki sq-416-420-625 Service Manual page 687

1. Dent
2. Protrusion of lifter
3. Resin part
4. Motor assembly "A": Apply sealant
6) Remove sliding roof deflector.
7) Pull out drip shoe, guide and cable assy as a set.
1. Drip shoe
2. Frame
3. Guide
ASSEMBLY
Reverse disassembly procedure for assembly, observing following
instructions.
CAUTION:
Match protrusion of guide and dent in cable for completely
closed position of sliding roof drive cable and match marks
(holes) for completely closed position of sliding roof motor
assembly and then install sliding roof motor assembly.
D Press the CLOSE side switch to match marks of sliding roof motor
assembly.
D Apply butyl rubber sealant to contact surface of the rear drip.
5. Hole
6. Hole (cam)
7. Rear drip
BODY SERVICE 9-69