S2M Maintenance; Account Manager (Cdr); Status Monitor Indicator - Siemens HiPath 1100 Service Manual

7.4.7

S2M Maintenance

The S2M Maintenance is an administrative program for configuring a TME1 module with S2
access.
Hardware Requirements:
– Serial interface communications (COM port).
General Information:
With the S2M Maintenance you can do the following:
Download software
●
Remove traces
●
Select the software's type of connection to the module (local or via modem)
●
Select a COM port
●
For further details on how to configure a TME1 module with E1 CAS access refer to the
program's "Help" system.
If the module does not initialize, check its status on the 7-segment display (see
"TME1 module" on page 3-69).
Availability of the HiPath 1100 Manager, HiPath 1100 ADSL Manager, E1 Trunk
Manager e S2M Maintenance administration software is subject to the client's
completion of the technical course for users of the equipment.
7.4.8

Account Manager (CDR)

Billing Data Software
To launch the Account Manager select:
Start/Programs/HiPath 1100/Call Detail Recording
7.4.9

Status Monitor indicator

Status Monitor Indicator on the computer.
To start a Status Monitor Indicator, select:
Start/Programs/HiPath 1100/StatusMonitor
Service Manual
Operation
HiPath 1100 applications
7-363