Siemens HiPath 1100 Service Manual page 236

Configuring the system specifically for the client
Comments about the system's programming codes
list 1 allows you to store 10 numbers;
●
list 2 allows you to store 25 numbers;
●
list 3 allows you to store 25 numbers.
●
To change an allowed number, simply enter its list number and then the new num-
ber.
Permission for using Speed Dial numbers without COS analysis (072)
This code allows users of a class with no designated permission to make external calls using the Speed Dial Phonebook.
COS assignment (111)
There are up to 8 access categories for accessing external lines that can be assigned to extensions:
No Trunk Access (No Permission) - For making internal calls and answering external calls
●
Outward-Restricted Trunk Access - For receiving internal and external calls, and for
●
answering and receiving transferred calls. However, it does not have normal access to
make external calls, except for calls dialed directly from the Phonebook or from Permission
Lists.
Restricted Trunk Access - For receiving internal and external calls and for making external
●
calls to any number that is not included in the Denied List
Unrestricted Trunk Access - Can make any type of call.
●
An extension may be assigned two different categories, one for Day and one for
Night service.
COS Changeover (178)
This code allows extensions to use a feature for temporarily changing over the class of service. It is therefore possible to allow
or deny an extension to transfer its class of service temporarily to another telephone.
Language (164)
Defines the language for displaying messages on the system telephone display. This field is not automatically updated since
it is based on the country option selected. When the Language field is changed the Country is not automatically changed. It is
therefore possible to select a country with a different default language. Example: Country: Brazil, Language: English.
Country/Group of Countries (165)
Specifies the country where the system will be used, configuring regional settings accordingly.
After Country settings are configured, the system is restarted.
6-236
Service Manual