Figure 7-58 Sw Router Adsl Firmware Update - Siemens HiPath 1100 Service Manual

– Default IP: 10.0.0.1
– Default Subnet Mask: 255.255.255.0.
If you need to reset the IP or Subnet Mask, enter code 013 for "Restoring default
LAN interface settings" after which the IP ADSL module will be 10.0.0.1.
ADSL router Software Update
The ADSL Router Software Update is a program used to update the module along with the IMG
file.
To perform the update, the ADSL line should be switched off and the system reset by pulling
out the AC power supply cable. Once you have reinserted the AC cable, wait approximately 2
minutes for the system to stabilize and start up.
Figure 7-58 SW Router ADSL firmware update
ADSL router Config
After you have updated the software, the ADSL module must be configured according to the
customer's needs using this tool.
Service Manual
Operation
HiPath 1100 applications
7-337