Siemens HiPath 1100 Service Manual page 245

External Call Forwarding cannot be used for an extension that belongs to a group
when "Call Deflection" (Code 228) is activated (it does not work for analog lines).
In this case, the system does not receive any information about whether or not the
forwarded call has been answered. Since the system does not have this information,
it continues to signal all other group members.
Search Mode for Hunt Groups (022)
This setting specifies the type of search to be performed for an available extension within a group, whether linear or round-
robin.
When a call is received by a Hunt Group configured for linear distribution, the search starts from the first extension within the
group. In a Round-robin distribution the search starts from the extension following the last extension selected.
Timeout within a Hunt Group (HG) (242)
This sets the length of time in which an external or internal call must be answered by a member
of the group, and may be set for each group. If this times out before the group member answers,
the call will ring consecutively to the other free extensions of the group.
The Hunt Group will not be forwarded or overflow if the call is not answered.
Override (144)
This setting allows a specific extension to "Override" two other extensions with a conversation in progress.
Within the system, Override has the same limitation as the Silent Monitoring and Conference features. A maximum of 2 si-
multaneous Silent Monitoring is allowed by the system. Note: The Override feature is ticketed as a Conference.
Silent Monitoring (046)
This setting specifies the extension for performing Overrides without a beep.
Within the system, Silent Monitoring has the same limitation as the Conference and Override features. A maximum of 2 si-
multaneous conferences is allowed by the system. Note: The Override feature is ticketed as a Conference.
If the monitoring or the monitored party change status, Silent Monitoring will be canceled. This occurs, for example, when a
call is placed on hold.
On Profiset 3030 telephones, the MUTE option is automatically activated with Silent
Monitoring.
Service Manual
Configuring the system specifically for the client
Comments about the system's programming codes
6-245