Siemens HiPath 1100 Service Manual page 255

Music Source Extension (089)
This setting specifies the extension to which a music source is connected.
The extension specified here is deactivated when the External music source - Ex-
tension assignment (064) option is configured.
External music source - Extension assignment (064)
With this feature, Music On Hold can be played from a terminal connected to an extension slot.
Setting the time for an external room monitor (169)
It allows you to activate room monitoring for a specified period of time, using the telephone's microphone.
If a Fax/DID module is installed in the system, room monitoring can be implemented using an external telephone (Babyphone).
Interdigit Pause Time Setting (227)
It lets you configure a pause ("P") between MF digits. This can be used when programming System and Individual Speed Di-
aling, system telephone programmable keys or for activating Suffix Dialing. This period of time can be set from 1 to 5 seconds.
The default setting is 2 seconds.
To insert an interdigit pause, enter the "P" character using the HiPath 1100 Manager or press the Redial key using
a system telephone. Each "P" character inserts a 2-second pause (default) in the connection. A longer pause can
be inserted by entering more than one character (for example, for a 4-second pause enter "PP")
The first "P#" or "#" specifies that the next digits for A will only be forwarded if:
- Digital line or S0 extension:
P# - DTMF digits are sent after local carrier identification, when B is not answered.
# - DTMF digits are sent after B is answered.
- External analog line or analog extension:
P# or # - DTMF digits are sent after B is answered.
Other characters ("#" and/or "*") may be added after "P#".
Caller List Type (049)
This setting specifies whether only external calls or all internal and external calls should be displayed in the Caller Lists.
Deleting digits from the Caller List (171)
Specifies the digits that do not need to be repeated when making a call.
Date/Time - Manual Setting (114)
Sets the current Date and Time for the system. When the default configuration is restored (99), the Date setting displays in-
formation about the date the software was create and will display the time as 12:00.
Service Manual
Configuring the system specifically for the client
Comments about the system's programming codes
6-255