Table of Contents
Advertisement
Chapter 6: Analyzer Operation
Viewing and Exporting Data
You can review the data history on the Analyzer screen, export the data to a USB flash memory drive, and/or
print the data.
Viewing Data On Screen
To view data history on the Analyzer screen
1.
Select the Data tab.
2.
Press the button for the data to view:
• Stream 1, Stream 2, Stream 3, Stream 4, or Stream 5 — Displays the data collected for the
corresponding stream.
• Vial Port — Displays data obtained from measurements made at the Vial Port.
• Check Standard — Displays the check standard measurements.
3.
Touch the screen or use the Page Up/Page Down buttons to move through the list of sampling data
that appears. To view data starting at a specific date, press the Go To button and use the date buttons
to specify the starting date.
Exporting Data
This section describes how to export historical data from the Analyzer directly to a USB memory device (.pdf or
.csv file), or export to a computer or computer network via an Ethernet connection (.csv file). For information on
GE Analytical Instruments ©2016
Figure 58: The Data Screen
152 of 270
DLM 68100-09 EN Rev. A
Advertisement
Table of Contents
