Siemens SINUMERIK 840D Operator's Manual page 71

09.01
Expanding projects
Dependencies
Without
Visual Workbench
© Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
The 'Application configuration' (\proj\app\obj_c800\app.mak) and
'Standard configuration' (\proj\std\obj_c800\std.mak) projects can be
modified in the Visual Workbench by selecting <Edit> from the
<Project> menu.
Please see the following sections for more information.
The dependencies with include files, source files and libraries are
already entered correctly for the "external makefiles".
In the project makefiles (*.mak) - std.mak and app.mak - the
dependencies can be generated automatically with the
<Scan Dependencies> item in the <Project> menu in the Visual
Workbench.
Please see the following sections for more information.
The configuration and texts can also be generated without the
Workbench. For this, it is essential to use the same settings for
environmental variables as when using the workbench. By calling
"nmake makefile" or "nmake –f std.mak" each makefile executes the
tasks described above. Because of the dependencies, it is only
necessary to change to the l:\proj catalog and then initiate complete
generation using the "nmake" command. All changed source files are
included in the generation process, including the text files.
In order to delete all generation results, you can initiate the "make
clean" command l:\proj catalog. To delete partial generation results
from the configuration, change to the relevant subcatalog and execute
this command as well.
After this it is advisable to generate everything anew, as described
above.
Development Kit (EU)
2 Installation
▄
EU/2-17