Workpiece Overview - Siemens SINUMERIK 840D Operator's Manual

Operator's Guide (BA)
3 Operation
3.12

Workpiece overview

Display
Selection
BA/3-36
Base: Base data defining
length 1 (8 characters),
length 2 or radius (8 characters)
4. Transfer your inputs to the system by selecting the softkey "OK".
The tool list display appears. You have now set up the new tool. If
you wish to load it, proceed as follows.
5. By selecting the softkey "OK" again, you load the tool you have just
created.
You can cancel the loading process and return to the basic display by
selecting the "RECALL" key.
•
of the list of existing workpiece files
•
of a single workpiece file by selecting with the cursor and pressing
the input key.
of the workpiece by positioning the cursor and pressing the "Select" key.
Fig. 3-27 Workpiece overview
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved
09.01