Siemens SINUMERIK 840D Operator's Manual page 70

Development Kit (EU)
2 Installation
\proj\makefile
\proj\text\
makefile
\proj\std\
obj_c800\std.mak
\proj\app\
obj_c800\app.mak
\proj\dat\
makefile
EU/2-16
The 5 individual make files are as follows:
This is an "external makefile". When this makefile is called, a
generation run is triggered for the entire configuration.
The sequence of directories for the generation is as follows:
text \proj\text\makefile
std \proj\std\obj_c800\std.mak
app \proj\app\obj_c800\app.mak
dat \proj\dat\makefile
The output window contains all messages of the nmake calls in the
processed directories.
This is an "external makefile". When this makefile is called, a
generation run is triggered for all texts (pj: configuration, al: alarms).
The binary text files for the foreground and background languages are
copied automatically to \bin.
The include files created with the foreground language (= master
language) are copied to \proj\h.
This is a project makefile for the Visual Workbench. The complete
generation of the standard configuration is possible with std.mak.
For this purpose, the text include files (\h\proj\t_*.h) must already have
been generated. (The text include files contain the declarations for the
text identifiers used during configuration.)
This is a project makefile for the Visual Workbench. The complete
generation of the application configuration is possible with app.mak.
For this purpose, the text include files (\h\proj\t_*.h) must already have
been generated. (The text include files contain the declarations for the
text identifiers used during configuration.)
This is an "external makefile". It is used to call the link run for the binary
configuration file - proj.dat -. Here std.lib and app.lib are linked to form
a binary configuration file.
If the generation of the binary configuration file is successful, the
following message appears:
"LINK : warning L4021: no stack segment
LINK : warning L4038: program has no starting address
PROJ.EXE - 0 error(s), 2 warning(s)"
The two warnings appear because of special link settings and can be
ignored. The proj.dat binary configuration file is subsequently copied
automatically to \bin.
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved
09.01