Siemens SINUMERIK 840D Operator's Manual page 194

Introduction to Configuring (PSE)
9 Tips
9.1 General
PSE/9-66
1. All lists assigned to a window should be placed in an applications source
file.
2. List identifiers should contain the window name in coded form in their name
(readability of the source code).
3. Never make more than a few changes or extensions so that errors can be
assigned (traced) more easily to a certain change/extension after a
compiler run.
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved
09.01
▄