Table 63
replication-volume properties (continued)
Name
Type
monitor-numeric
string
location
string
location-
string
numeric
ip-address-a
string
ip-address-b
string
primary-volume-
string
name
primary-volume-
string
serial
primary-volume-
string
status
primary-volume-
string
status-numeric
max-queue
uint32
max-retry-time
uint32
error-policy
string
error-policy-
string
numeric
link-type
string
link-type-
string
numeric
Description
Numeric equivalents for monitor values.
•
2: OK
•
other: Failed
•
Local: The replication volume is in the local system.
•
Remote: The replication volume is in a remote system.
Numeric equivalents for location values.
•
0: Local
•
1: Remote
IP address of the network port in controller A in the remote system.
IP address of the network port in controller B in the remote system.
Primary volume name.
Primary volume serial number.
Primary volume status.
•
Online
•
Conflict
•
Offline
Numeric equivalents for primary-volume-status values.
•
0: Online
•
1: Conflict
•
2: Offline
Maximum number of replication images to consider when determining the next
image to replicate. Used only if the collision-policy property is set to
Oldest. The default is 32.
Maximum amount of time in seconds that the replication volume should retry a
replication operation on any specific image when errors occur. Used only if the
error-policy property is set to Retry. The default is 1800.
Determines the action to take when an error occurs during replication.
•
Retry: Retry the replication for the time specified by the max-retry-
time property. This is the default.
•
Suspend: Suspend the replication until the error is resolved automatically or
through user intervention.
Numeric equivalents for error-policy values.
•
0: Retry
•
1: Suspend
Type of ports used to link the primary and secondary volumes.
•
FC: FC ports.
•
iSCSI: iSCSI ports.
Numeric equivalents for link-type values.
•
8: FC WWNN
•
16: FC WWPN
64: iSCSI IPv4
•
•
128: iSCSI IPv6
HP P2000 G3 MSA System CLI Reference Guide 453