Hosts - HP P2000 G3 Cli Reference Manual

hosts

Properties
Table 38 hosts properties
Name
host-id
host-name
host-discovered
host-mapped
host-profile
host-bus-type
host-port-bits-
a
host-port-bits-
b
Example
# show hosts
...
<OBJECT basetype="hosts" name="hosts" oid="1" format="rows">
<PROPERTY name="host-id" key="true" type="string">10000000c978526c</PROPERTY>
<PROPERTY name="host-name" type="string">test7_hba1</PROPERTY>
<PROPERTY name="host-discovered" type="string">Yes</PROPERTY>
<PROPERTY name="host-mapped" type="string">Yes</PROPERTY>
<PROPERTY name="host-profile" type="string">Standard</PROPERTY>
<PROPERTY name="host-bus-type" type="string">FC</PROPERTY>
<PROPERTY name="host-port-bits-a" type="uint32">3</PROPERTY>
<PROPERTY name="host-port-bits-b" type="uint32">3</PROPERTY>
</OBJECT>
...
Type Description
FC or SAS host port WWN, or iSCSI host initiator node name (typically the
string
IQN).
User-defined name of the host port, or blank.
string
• Yes: The host was discovered and its entry was automatically created.
string
• No: The host entry was manually created.
• Yes: At least one volume is explicitly mapped to the host.
string
• No: No volumes are explicitly mapped to the host.
• Standard: The host allows LUN 0 to be assigned to a mapping.
string
• OpenVMS: The host does not allow LUN 0 to be assigned to a mapping.
• HP-UX: The host allows LUN 0 to be assigned to a mapping and uses Flat
Space Addressing.
• If the host was discovered and its entry was automatically created, its host
string
interface type: FC; iSCSI; SAS.
• If the host entry was manually created: Undefined.
For internal use only.
uint32
For internal use only.
uint32
HP P2000 G3 MSA System CLI Reference Guide 413