Resume Replication - HP P2000 G3 Cli Reference Manual

resume replication

Description Resumes a suspended replication operation on the specified secondary volume. This command must
be issued on the system that owns the secondary volume.
Syntax
resume replication
[set replication-set]
replication-volume
Parameters set replication-set
Optional. Name or serial number of the replication set.
replication-volume
Name or serial number of the secondary volume. If the name is not unique across replication sets,
specify the set parameter.
Example Resume replication of primary volume V1 to secondary volume rV1:
# resume replication rV1
Success: Command completed successfully. (2012-01-20 14:51:14)
See also • abort replication
• show replication-sets
• show replication-volumes
HP P2000 G3 MSA System CLI Reference Guide 129