HP P2000 G3 Cli Reference Manual page 361

Table 16 cli-parameters properties (continued)
Name Type
locale string
locale-numeric string
storage-size- uint8
base
storage-size- uint8
precision
storage-size- string
units
storage-size- string
units-numeric
temperature- string
scale
Description
Display language.
• English (the default)
•
Spanish
•
French
•
German
•
Italian
•
Japanese
•
Korean
•
Dutch
•
Chinese-simplified
•
Chinese-traditional
Numeric equivalents for locale values.
•
0: English
•
1: Spanish
•
2: French
•
3: German
•
4: Italian
•
5: Japanese
•
9: Korean
•
6: Dutch
•
7: Chinese-simplified
•
8: Chinese-traditional
Base for entry and display of storage-space sizes.
• 2: Sizes are shown as powers of 2, using 1024 as a divisor for each
magnitude.
10: Sizes are shown as powers of 10, using 1000 as a divisor for each
•
magnitude. This is the default.
Operating systems usually show volume size in base 2. Disk drives usually show
size in base 10. Memory (RAM and ROM) size is always shown in base 2.
Number of decimal places (1–10) for display of storage-space sizes. The default
is 1.
Unit for display of storage-space sizes.
• Auto: Lets the system determine the proper unit for a size. This is the default.
• MB: Sizes are shown in megabytes.
• GB: Sizes are shown in gigabytes.
• TB: Sizes are shown in terabytes.
Based on the precision setting, if a size is too small to meaningfully display in
the selected unit, the system uses a smaller unit for that size. For example, if
storage-size-units is set to TB, storage-size-precision is set to 1,
and storage-size-base is set to 10, the size 0.1 1709 TB is instead shown as
1 17.1 GB.
Numeric equivalents for storage-size-units values.
•
0: Auto
•
1: MB
•
2: GB
•
3: TB
• Fahrenheit: Temperatures are shown in degrees Fahrenheit.
• Celsius: Temperatures are shown in degrees Celsius. This is the default.
HP P2000 G3 MSA System CLI Reference Guide 361