Set Enclosure - HP P2000 G3 Cli Reference Manual

set enclosure

Description Sets an enclosure's name, location, rack number, and rack position. Set these parameters to values
that help you identify and locate the enclosure. A value that contains a space must be enclosed in
double quotes.
These values are used when user interfaces show enclosure-related data; for example, in output of
the show enclosures
Syntax
set enclosure
[name new-name]
[location location]
[rack-number rack-number]
[rack-position rack-position]
enclosure-number
Parameters name new-name
A new name for the enclosure. The name can include a maximum of 20 bytes, using printable UTF-8
characters except double quote, left angle bracket, comma, or backslash. A value that contains a
space must be enclosed in double quotes.
location location
The location of the enclosure. The name can include a maximum of 20 bytes, using characters
except double quote, left angle bracket, comma, or backslash. A value that contains a space must
be enclosed in double quotes.
rack-number rack-number
The number of the rack containing the enclosure, from 0–255.
rack-position rack-position
The enclosure's position in the rack, from 0–255.
enclosure-number
The enclosure ID.
Example Set parameters for enclosure 1:
# set enclosure 1 name Storage-5 location Lab rack-number 9 rack-position 3
Success: Command completed successfully. (2012-01-21 12:03:12)
See also • show enclosures
150 Alphabetical list of commands
command and in event-log entries related to enclosures.