Abort Replication - HP P2000 G3 Cli Reference Manual

abort replication

Description Aborts the current replication operation on the specified secondary volume. The current replication
may be running or suspended. This command must be issued on the system that owns the secondary
volume.
Syntax
abort replication
[set replication-set]
replication-volume
Parameters set replication-set
Optional. Name or serial number of the replication set.
replication-volume
Name or serial number of the secondary volume. If the name is not unique across replication sets,
specify the set parameter.
Example Abort replication of primary volume V1 to secondary volume rV1:
# abort replication rV1
Success: Command completed successfully. (2012-01-20 14:52:27)
See also • resume replication
• suspend replication
• show replication-sets
• show replication-volumes
32 Alphabetical list of commands