GE NX-10 Installation Manual page 23

Location
6.1.7.5 Scan Time
6.1.7.6 Relay Active Time
6.1.7.7 Partitions
6.1.7.8 Logging Partition
6.1.8 Schedules
6.1.8.1.1 Opening
6.1.8.1.2 Closing
6.1.8.1.3 Active
6.1.8.1.3.1 Disable on Holidays
6.1.9 User Cards
6.1.9.1.1 Activated
6.1.10 Date of holidays
6.1.11 Reset Reader Address
6.1.12 Model
6.1.12 Version
Term
A menu option that specifies the length of time during
which the proximity card must be held near the proximity
reader to activate its functions. A proximity reader can be
programmed to activate different functions depending on
whether the card is held near it once, twice within this time
or continuously for this time.
A menu option that sets the length of time the relay is
activated when a proximity card is held against the
proximity reader.
A menu entry that lists the partitions assigned to the
selected proximity reader. The selected proximity reader
can trigger an event on these partitions.
A menu option that specifies the partition number that the
proximity reader adds to any event that it records in the
event log.
A menu option that, combined with Output Schedule
Selection selects the schedules that affect the proximity
reader.
A menu option that sets the time at which the selected
schedule enters the open state.
A menu option that sets the time at which the selected
schedule enters the closed state.
A menu option that specifies the days of the week that the
selected schedule is active.
A menu option that activates the holidays feature. The
selected schedule is not active on the dates specified in
Date of holidays.
A menu entry that groups the user card activation
functions.
A menu option that activates the particular user card.
A menu option that sets the dates of holidays. If the
holidays feature (6.1.8.1.3.1) has been enabled, no
schedules are active on these dates. Up to eight holidays
per month can be specified.
A menu option that wipes the proximity reader's module
number so that the reader can be learned in again on the
control panel.
A menu option that displays the current model of the
proximity reader.
A menu option that displays the current software version of
the proximity reader.
NX-10 Expander Installation Guide
Definition
23