GE NX-10 Installation Manual page 142

Location
14.1.1.2.2.3 Expander Trouble and Restores
14.1.1.2.2.4 Siren/Line Cut and Restores
14.1.1.2.2.5 RF Sensor Lost and Restores
14.1.1.2.2.6 RF Low Battery and Restores
14.1.1.2.3 Power
14.1.1.2.3.1 Power Trouble and Restores
14.1.1.2.3.2 Aux Short Circuit and Restores
14.1.1.2.4 Communications
14.1.1.2.4.1 Fail to Communicate
14.1.1.2.4.2 Test Reports
14.1.1.2.5.1 Program/Download
14.1.1.2.5.2 Zone Activity Monitor
14.2 E-mail Reporting
14.2.1 Our E-mail Address
14.2.2 E-mail Accounts
14.2.2.1.1 E-mail Address
Term
A menu option that sends an expander fault and restore
report to the selected receiver.
A menu option that sends a report to the selected receiver
when a siren or phone fault occurs. A restore report is sent
when the fault is fixed.
A menu option that sends a report to the selected receiver
when an RF sensor is missing. A restore report is sent to the
central station when the receiver receives a valid signal
from the lost transmitter.
A menu option that sends a report to the selected receiver
when a low battery condition occurs in an RF sensor. A
restore report is also sent when the low battery condition is
no longer active.
A menu entry that groups the power events that are
reported to the selected receiver.
A menu option that reports power failure, power restore,
low battery and low battery restore events to the selected
receiver.
A menu option that sends a report to the selected receiver
when too much current is detected. A restore report is also
sent when the short circuit condition is fixed.
A menu entry that groups the communication events that
are reported to the selected receiver.
A menu option that reports a fail to communicate event to
the selected report control.
A menu option that sends a test report to the selected
receiver. The units can be set in days or hours.
A menu option and that reports programming and
up/download events to the selected receiver.
A menu option menu option that sends a report to the
selected receiver when a zone inactivity event occurs.
A menu entry that groups email reporting options.
A menu option that configures the email address assigned
to the NX-590E TCP/IP module. This is a mandatory setting
for email reporting. The mail server must accept the
domain name. Many mail servers reject emails from
domains other than their own to prevent spamming.
A menu entry that groups email account options.
A menu option that configures the address of the selected
email account. This must be a functional email account
that is known to work. A large variety of devices can be
utilised including computers, cell phones, pagers and
devices.
Definition