Programming The Nx-534E Listen-In Module; Configuring Listen-In Options; Programming Timers - GE NX-10 Installation Manual

Programming the NX-534E listen-in module

Figure 14. NX-534E menu structure
Feature Select
10.1
Call Back Code
10.2
Line Hold Digit
10.3
Wrong PIN Digit Entries
10.4
Rings to Answer
10.5
Timers
10.6
Volumes
10.7
Light Control
10.8
Model
10.9
Version
10.10
Reset Settings
10.11
You must enrol and default the NX-534E module before you begin to program the system. For more
information on enrolling and defaulting, see chapter 6. To program the NX-534E, select Installer
Menu>NX-534E Listen-in Module.

Configuring listen-in options

You can configure the listen-in mode and listen-in options. The following example prevents the
central station turning on the speaker at the premises if a duress, silent panic or hold-up alarm is
reported by the control panel.
Navigate with the
1.
Scroll to Speaker Lockout>Yes and press OK.
2.
The keypad beeps once to accept the change and returns to Speaker Lockout.
3.

Programming timers

You can set timers to control various NX-534E listen-in module features. The following example sets
the line hold digit to 2 and line hold timeout to 60 seconds.
Navigate with the
1.
Select 2 and press OK.
2.
Mode
10.1.1
Listen-in Only
10.1.2
Speaker Lockout
10.1.3
Mic A at Startup
10.1.4
Mic B at Startup
10.1.5
Answer Machine Defeat
10.1.6
Control Lvl 7&8
10.1.7
Line Hold Timeout
10.6.1
New Trip Hangup Time
10.6.2
Call Back Window Timer
10.6.3
Session Timeout
10.6.4
Indicator-A Time Remaining
10.6.5
Indicator-B Time Remaining
10.6.6
Anti-Lock-Up Tone Time
10.6.7
Low Gain Listen In
10.7.1
High Gain Listen In
10.7.2
Speaker
10.7.3
Device 1
10.8.1
Devices 2 - 9
Same as above
keys to NX-534E>Feature Select and press OK.
keys to NX-534E>Line Hold Digit and press OK.
NX-10 Expander Installation Guide
Module Number
10.8.1.
House Code
10.8.1.
115