GE NX-10 Installation Manual page 157

Connect the NetworX bus cables from the NX-534 to the panel. You can use standard
9.
NetworX bus contacts or bus connectors.
Plug-in the 5-pin audio cable connector to the audio tap on the panel.
10.
Attach the pillars for the NX-535 voice module to the board.
11.
Attach the NX-535 voice module to the board via the pillars.
12.
Connect the NX-534E listen-in module and NX-535 voice module with the dual audio
13.
cable.
Connect the NetworX bus cables from the NX-535 voice module to the panel.
14.
Flip down the PCB mounting tray.
15.
Figure 20. Attaching the NX-534E and NX-535 to the panel.
NX-10 Expander Installation Guide
157