Table of Contents
Advertisement
List of Functions
Reset menu
Resets all of the network settings.
Sub-menu
To reset all of the Network settings, select Yes.
Reset network
settings.
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected. Depending on the model used, some input
sources are not supported.
Function
"Automatically Detect Input Signals and Change the Projected Image
s
(Source Search)"
p.32
Sub-menu
You can display the cumulative lamp operating time
Lamp Hours
When it reaches the lamp warning time, the characters are
displayed in yellow.
You can display the source name for the connected
Source
equipment currently being projected.
You can display the content of Input Signal set in the
Input Signal
Signal menu according to the source.
Resolution
You can display the resolution.
You can display the settings for Video Signal in the Signal
Video Signal
menu.
You can display the refresh rate
Refresh Rate
Sync Info
You can display the image signal Information.
It may be needed if service is required.
92
Function
*
.
g
.
Advertisement
Table of Contents
