Table of Contents
Advertisement
List of Functions
Yes: Saves the settings and exits the Network menu.
No: Does not save the settings and exits the Network menu.
Cancel: Continues displaying the Network menu.
Soft keyboard operations
The Network menu contains items that require input of alphanumerics
during setup. In this case, the following software keyboard is displayed. Use
the [
], [
], [ ], and [ ] buttons on the remote control or the [
[
], [Wide], and [Tele] buttons on the control panel to move the cursor
to the desired key, and then press the [
alphanumeric character. Enter figures by holding down the [Num] button
on the remote control, and pressing the numeric buttons. After inputting,
press Finish on the keyboard to confirm your input. Press Cancel on the
keyboard to cancel your input.
• Each time the CAPS key is selected and the [
sets and changes between upper case and lower case letters.
• Each time the SYM1/2 key is selected and the [
sets and changes the symbol keys for the section enclosed by the frame.
],
] button to enter the
] button is pressed, it
] button is pressed, it
Basic menu
Sub-menu
Displays the projector name used to identify the projector when
Projector Name
connected to a network.
When editing, you can enter up to 16 single-byte alphanumeric
characters.
Set a password to use when you access the projector using
PJLink Password
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
Set a password to use when making settings and controlling the
Web Control
projector using Web Control. Enter no more than eight single-
Password
byte alphanumeric characters. Web Control is a computer
function that allows you to set up and control the projector by
using the Web browser on a computer connected on a network.
s "Changing Settings Using a Web Browser (Web Control)"
p.128
85
Function
Advertisement
Table of Contents
