Table of Contents
Advertisement
Projecting images
Switching to the Target Image Using the Remote
Control
You can change directly to the target image by pressing the following
buttons on the remote control.
A
Each time the button is pressed, it cycles through the following images:
• Computer1 port
• Computer2 port
B
Each time the button is pressed, it cycles through the following images:
• S-Video port
• Video port
• HDMI port
C
Changes to the images projected with EasyMP Network Projection. When
projecting using the optional Quick Wireless Connection USB Key, this
button switches to that image.
D
Each time the button is pressed, it cycles through the following images:
• USB Display
• Images from the device connected to the USB(TypeA) port
Remote control
Projecting with USB Display
You can use the supplied USB cable to connect the projector to a computer
to project images from the computer.
You can send the computer's audio with the projected image.
Set USB Type B to USB Display/Easy Interactive Function or Wireless
Mouse/USB Display to use USB Display.
Extended - USB Type B
s
System requirements
For Windows
Windows 2000
OS
Windows XP
Windows Vista
Windows 7
Mobile Pentium III 1.2 GHz or faster
CPU
Recommended: Pentium M 1.6 GHz or faster
Amount of
256 MB or more
Memory
Recommended: 512 MB or more
20 MB or more
Hard Disk
Free Space
p.80
*1
*2
Professional 32 bit, Home Edition 32
bit, Tablet PC Edition 32 bit
Ultimate 32 bit, Enterprise 32 bit,
Business 32 bit, Home Premium 32
bit, Home Basic 32 bit
Ultimate 32/64 bit, Enterprise 32/64
bit, Professional 32/64 bit, Home
Premium 32/64 bit, Home Basic 32
bit, Starter 32 bit
33
Advertisement
Table of Contents
