Table of Contents
Advertisement
Adjusting Projected Images
Correcting the Focus
You can correct the focus using the focus ring.
Adjusting the Volume
You can adjust the volume using one of the following methods.
• Press the [Volume] buttons on the remote control to adjust the volume.
[
] Decreases the volume.
a
[
] Increases the volume.
b
Remote control
• Adjust the volume from the Configuration menu.
Settings - Volume
p.79
s
Caution
Do not start when the volume is set too high.
A sudden increase in volume may cause loss of hearing. Always lower the
volume before powering off, so that you can power on and then gradually
increase the volume.
Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Mode
Ideal for use in a bright room. This is the brightest
Dynamic
mode, and reproduces shadow tones well.
Presentation
Ideal for making presentations using color materials
in a bright room.
Ideal for watching films in a dark room. Gives
Theatre
images a natural tone.
*1
Ideal for projecting still pictures, such as photos, in
Photo
a bright room. The images are vivid and brought
into contrast.
*2
Ideal for watching TV programmes in a bright
Sports
room. The images are vivid and brought to life.
Ideal for images that conform to the sRGB
sRGB
standard.
41
Application
g
color
Advertisement
Table of Contents
