Problem Solving
Check
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source)
Images appear dark
Check
Is the image brightness set correctly?
g
Is the contrast
adjusted correctly?
Is it time to replace the lamp?
Problems when Projection Starts
The projector does not turn on
Check
Did you press the [t] button?
Are all of the indicators off?
Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the power cable. If this
Adjust the Color Saturation and Tint settings from the Configuration menu.
s Image - Color Saturation, Tint
p.76
Make Brightness and Power Consumption settings from the Configuration menu.
s Image - Brightness
p.76
s Settings - Power Consumption
p.79
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast
p.76
When the lamp is nearly ready for replacement, the images become darker and the color quality declines. Replace the
lamp with a new one.
s "Replacing the Lamp"
p.116
Press the [t] button to turn the power on.
The power cord is not connected correctly or power is not being supplied.
Disconnect and then reconnect the power cord.
Check the breaker and so on to ensure power is being supplied.
does not solve the problem, stop using the projector, disconnect the power cable from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.
Epson Projector Contact List
s
Remedy
Remedy
Remedy
105