Manager Mode; Entering The Manager Mode; Override Entries - Sharp UP-3301 Instruction Manual

9

Manager Mode

The manager mode is used when managerial decisions must be made concerning POS terminal
entries, for example, for overriding limitations and for other various non-programming managerial
tasks.
NOTE
Normal POS terminal operations may also be performed in this mode. However, a receipt is
issued whether the receipt function is ON or OFF.

Entering the Manager Mode

To enter the manager mode, touch the
Procedure
The display shown
at right will appear.
XX
MGR
Manager code
The manager code is stored in the manager file in advance.
If the code entered is not found in this file, an error occurs.
If the code is correct, it is printed on the journal and the
POS terminal enters the manager mode (the manager is
signed on).
The manager is signed off automatically each time a
transaction is finalized.
If the manager code entry is compelled, the manager entry pad will be opened in the window.
NOTE

Override Entries

Programmed limits (such as maximum amounts) for functions can be overridden by placing the POS
terminal in the manager mode.
Example
Selling a $15.00 item (PLU no. 9) for cash and subtracting the coupon amount $2.50 from the sales amount
(This example presumes that the POS terminal has been programmed not to allow coupon entries over
$2.00.)
Key Operation
REG-mode entries
To enter the
manager mode
Returned to the REG mode
key, then use the following procedure:
MGR
When "0" is programmed for the
secret code
XXXX
Secret code
000009
...... Error
250
(–)2 000009
CLEAR
MGR
1
MGR#
0001
ENTER
250
(–)2 000009
CASH
ENTER
MGR MODE
Display
Display
59