Server Code Entries; Item Selection From The Menu Window - Sharp UP-3301 Instruction Manual

Server Code Entries

Prior to an item entry, the server may be compelled to enter his or her assigned server code. However, this
may not be necessary when the POS terminal has been programmed for "stay-down server mode."
Procedure
XXXX
Server code
NOTE
• When the server entry system is programmed for "stay-down server mode," no other server can sign on
unless the server who has signed on is signed off.
• When the server entry system is programmed for "automatic server sign-off mode," any other server is
able to sign on even when some servers have signed on without making entries. At this time the current
server is automatically signed off.
The sign-off operation can be performed by using the following procedure in the REG or MGR mode.
To sign off a server: ➞
• If the item entry is made when the server has signed off, the server entry pad will open in the window and
server entry will be required.

Item Selection from the Menu Window

Your POS terminal allows you to select functions from a menu window. For example, if you want to enter an
item for Paid-out 1, select the option "PO" from the "M.FUNC" menu instead of touching the
Each menu can be opened as follows:
• PLU menu window
➞
PLU/SB
XXXX
SRV#
Secret code
SRV#
X
ENTER
Drawer no.
• Miscellaneous menu window
➞
M.FUNC
ENTER
key.
PO
29