Manager Mode; Entering The Manager Mode; Override Entries - Sharp ER-A770 Instruction Manual

9

Manager Mode

The manager mode is used when managerial decisions must be made concerning POS terminal
entries, for example, for overriding limitations and for other various non-programming managerial
tasks.
NOTE
Normal POS terminal operations may also be performed in this mode. However, a receipt is
issued whether the receipt function is ON or OFF.

Entering the Manager Mode

To enter the manager mode, select the REG mode from the mode selection menu, then use the following
procedure:
The display shown
at right will appear.
XX
MGR
Manager code
#
The manager code is stored in the manager file in advance.
If the code entered is not found in this file, an error occurs.
If the code is correct, it is printed on the journal and the
POS terminal enters the manager mode (the manager is
signed on).
The manager is signed off automatically each time a
transaction is finalized.
If the manager code entry is compelled, the manager entry pad will be opened in the window.
NOTE

Override Entries

Programmed limits (such as maximum amounts) for functions can be overriden by placing the POS terminal
in the manager mode.
Selling a $15.00 item (PLU no. 9) for cash and subtracting the coupon amount $2.50 from the sales amount
(This example presumes that the POS terminal has been programmed not to allow coupon entries over
$2.00.)
REG-mode entries
To enter the
manager mode
To return to the
REG mode
When "0" is programmed for the
secret code
XXXX
Secret code
1500
9
...... Error
250
- 2
9
CL
1
MGR
#
0001
ENTER
250
- 2
9
CA/AT
ENTER
MGR MODE
51