Samsung BACnet Gateway MIM-B17N Installation Manual page 15

Installing the BACnet Gateway (Continued)
Connect
communication
cable
Cable tie
14
E-
NASAS_MIM-B17N_BACnet Gateway_IM_EN_03719A(1).indd 14
Connecting SIM/PIM
1
Unfasten the 2 screws on the bottom of the BACnet
Gateway front cover. Hold the bottom 2 sides of the
BACnet Gateway and push downwards to slide open the
cover.
2
Connect the adapter to the power terminal.
 Arrange the adapter as the left figure.
Adapter
3 Separate 1 terminal block from 5 terminal blocks which
are attached to RS485 communication terminal.
Then, connect SIM/PIM communication cable (C1, C2) to
the terminal block. (C1A, C2B)
4
Connect LAN cable to the Ethernet terminal of BACnet
Gateway. Then arrange it using cable tie.
5 Fasten the bottom cover of BACnet Gateway and fix it
using 2 screws.
LAN cable
Maximum 8 SIM/PIM units can be connected to one BACnet
Gateway.
2013-04-25 오전 10:14:36