USING THE GOT
STEP3
1. CHECKING THE ON/OFF ACTION OF SWITCHES
STEP3 USING THE GOT
1. Checking the ON/OFF Action of Switches
Checking the ON/OFF action of switches
1-1
Touch each switch to check the switch action.
(1)
Display the created screen.
The following shows the action set for each object.
(1) RUN switch
Touching this switch starts operation (M0 is turned on).
(2) STOP switch
Touching this switch stops operation (M1 is turned on).
(3) Running lamp
RUN: The lamp turns on with the text "RUN". (While M0 is on, Y10 is on.)
(Y10 turns on by the sequence program.)
STOP: The lamp turns off with the text "STOP". (While M1 is on, Y10 is off.)
(Y10 turns off by the sequence program.)
(4) Data 1 (Numerical display)
RUN: The numerical value 6666 is shown. (While M0 is on.)
(The value 6666 is stored in D10 by the sequence program.)
STOP: The numerical value 3333 is shown. (While M1 is on.)
(The value 3333 is stored in D10 by the sequence program.)
57
1. CHECKING THE ON/OFF ACTION OF SWITCHES
(2)
(3)
(4)