TRANSFERRING THE PROJECT DATA
STEP2
1. TRANSFERRING THE PROJECT DATA
2. Communication setting
Configure the communication setting of the personal computer and the GOT.
Power on the GOT before the configuration.
Click!
3
51
1. TRANSFERRING THE PROJECT DATA
Click!
1
Check that "Connection to
GOT: Direct" and "PC side I/F:
USB" are selected.
2
Click!
4
Select [Communication] → [Write to GOT] from
1
the menu bar.
Check that the following settings are
2
configured.
Connection to GOT: Direct
PC side I/F: USB
Perform the communication test to check the
communication.
Click the [Test] button.
3
When the message [Successfully connected.]
4
appears, click the [OK] button.
Click the [OK] button.
5
Click!
5