TRANSFERRING THE PROJECT
STEP2
2. CONNECTING THE GOT AND THE PLC
2. CONNECTING THE GOT AND PLC
Connecting the GOT and the PLC
2-1
1. Connecting the GOT and the PLC
Connect the GOT and the PLC.
Before connecting the GOT and the PLC, check that the GOT and the PLC are powered off.
After that, connect the GOT and the PLC using an Ethernet cable, and power on the GOT and the PLC.
GOT
Connect to the Ethernet interface
on the rear face
The language selection screen appears. Select [English].
53
2. CONNECTING THE GOT AND THE PLC
PLC
Connect to the Ethernet interface
on the front face